Publications

Hydroxyl radical footprinting is a valuable technique for studying protein structure, but care must be taken to ensure that the protein does not unfold during the labeling process due to oxidative damage. Footprinting methods based on submicrosecond laser photolysis of peroxide that complete the labeling process faster than the protein can unfold have been recently described; however, the mere presence of large amounts of hydrogen peroxide can also cause uncontrolled oxidation and minor conformational changes. We have developed a novel method for submicrosecond hydroxyl radical protein footprinting using a pulsed electron beam from a 2 MeV Van de Graaff electron accelerator to generate a high concentration of hydroxyl radicals by radiolysis of water. The amount of oxidation can be controlled by buffer composition, pulsewidth, dose, and dissolved nitrous oxide gas in the sample. Our results with ubiquitin and beta-lactoglobulin A demonstrate that one submicrosecond electron beam pulse produces extensive protein surface modifications. Highly reactive residues that are buried within the protein structure are not oxidized, indicating that the protein retains its folded structure during the labeling process. Time-resolved spectroscopy indicates that the major part of protein oxidation is complete in a time scale shorter than that of large scale protein motions.

Biomolecular surface mapping methods offer an important alternative method for characterizing protein-protein and protein-ligand interactions in cases in which it is not possible to determine high-resolution three-dimensional (3D) structures of complexes. Hydroxyl radical footprinting offers a significant advance in footprint resolution compared with traditional chemical derivatization. Here we present results of footprinting performed with hydroxyl radicals generated on the nanosecond time scale by laser-induced photodissociation of hydrogen peroxide. We applied this emerging method to a carbohydrate-binding protein, galectin-1. Since galectin-1 occurs as a homodimer, footprinting was employed to characterize the interface of the monomeric subunits. Efficient analysis of the mass spectrometry data for the oxidized protein was achieved with the recently developed ByOnic (Palo Alto, CA) software that was altered to handle the large number of modifications arising from side-chain oxidation. Quantification of the level of oxidation has been achieved by employing spectral intensities for all of the observed oxidation states on a per-residue basis. The level of accuracy achievable from spectral intensities was determined by examination of mixtures of synthetic peptides related to those present after oxidation and tryptic digestion of galectin-1. A direct relationship between side-chain solvent accessibility and level of oxidation emerged, which enabled the prediction of the level of oxidation given the 3D structure of the protein. The precision of this relationship was enhanced through the use of average solvent accessibilities computed from 10 ns molecular dynamics simulations of the protein.

The protective antigen (PA) component of the anthrax toxin (ATx) plays an essential role in the pathogenesis of the bioterrorism bacterium Bacillus anthracis. After oligomerization on the cell surface and docking of lethal factor and/or edema factor, PA is internalized and undergoes a conformational change when exposed to the low pH of the endosome to form a membrane-penetrating pore. While the structure of the PA prepore has been determined, precise structural information regarding the pore state remains lacking. Oxidative protein footprinting (OPF) can provide dynamic structural information about a protein complex through analysis of amino acid oxidation both before and after a conformational change. In this study, PA at pH 7.5 and 5.5 was exposed to hydroxyl radicals generated by ionizing radiation. Mass spectrometry was then used to both identify and quantitate the extent of oxidation of differentially modified residues. Several residues were found to be more readily oxidized at pH 7.5, most of which clustered toward the bottom plane of the prepore heptamer. Two amino acids had greater oxidation rates at pH 5.5, both found on the outer periphery of the prepore. When the OPF results were mapped to a current computational model of the pore, the accessibilities of some residues were consistent with their modeled positions in the pore (i.e., Y688 and V619/I620), while data for other residues (W346 and M350) appeared to conflict with the model. The results from this study illustrate the utility of OPF in generating empirical structural information for yet undetermined structures and offering opportunities for refinement for models thereof.

Protein oxidation by reactive oxygen species is known to result in changes in the structure and function of the oxidized protein. Many proteins can tolerate multiple oxidation events before altering their conformation, while others suffer gross changes in conformation after a single oxidation event. Additionally, reactive oxygen species have been used in conjunction with mass spectrometry to map the accessible surface of proteins, often after verification that the oxidations do not alter the conformation. However, detection of oxidation-induced conformational changes by detailed kinetic oxidation analysis of individual proteolytic peptides or non-mass spectrometric analysis is labor-intensive and often requires significant amounts of sample. In this work, we describe a methodology to detect oxidation-induced conformational changes in proteins via direct analysis of the intact protein. The kinetics of addition of oxygen to unmodified protein are compared with the kinetics of addition of oxygen to the mono-oxidized protein. These changes in the rate of oxidation of the oxidized versus the non-oxidized protein are strongly correlated with increases in the random coil content as measured by the molar ellipticity at 198 nm. This methodology requires only small amounts of protein, and can be done rapidly without additional sample handling or derivatization.

Calmodulin (CaM) is known to undergo conformational and functional changes on oxidation, allowing CaM to function as an oxidative stress sensor. We report the use of a novel mass spectrometry-based methodology to monitor the structure of apo- and holo-CaM as it undergoes conformational changes as a result of increasing amounts of oxidative damage. The kinetics of oxidation for eight peptides are followed by mass spectrometry, and 12 sites of oxidation are determined by MS/MS. Changes in the pseudo-first-order rate constant of oxidation for a peptide after increasing radiation exposure reveal changes in the accessibility of the peptide to the diffusing hydroxyl radical, indicating conformational changes as a function of increased oxidative damage. For holo-CaM, most sites rapidly become less exposed to hydroxyl radicals as the protein accumulates oxidative damage, indicating a closing of the hydrophobic pockets in the N- and C-terminal lobes. For apo-CaM, many of the sites rapidly become more exposed until they resemble the solvent accessibility of holo-CaM in the native structure and then rapidly become more buried, mimicking the conformational changes of holo-CaM. At the most heavily damaged points measured, the rates of oxidation for both apo- and holo-CaM are essentially identical, suggesting the two assume similar structures.

When most proteins undergo oxidative damage, they yield a variety of products containing oxidative damage at a large number of sites, most of which are modified substoichiometrically. The resulting complex mixture of products is not amenable to high-resolution structural analyses. The previous methods of structural analysis have relied upon either very generalized structural analyses such as circular dichroism or the creation of a battery of mutants to try to isolate single-residue damage effects. We present a methodology using mass spectrometry to measure the kinetics of oxidation at many sites simultaneously. Previous studies have shown that these kinetics are determined by the chemical nature of the damage site and by the accessibility of that site to the radical. By measuring deviations in the rate of oxidation from the expected pseudo-zero-order kinetics, we can detect and characterize local structural changes due to the oxidative damage. We demonstrate the application of this new technique to the Spo0F protein, a regulator of sporulation in Bacillus subtilis. Circular dichroism studies suggest a partial loss of helical structure of Spo0F as a result of oxidative damage. We report that oxidation causes a three-stage conformational change in Spo0F. Furthermore, we find the dramatic structural changes affect only the region surrounding the active site, while the remainder of the structure remains relatively unperturbed. Finally, we are able to determine that the specific oxidation event that triggers the conformational change at the active site of Spo0F occurs at Met81, a partially conserved methionine in the CheY superfamily.

Sindbis is an Alphavirus capable of infecting and replicating in both vertebrate and invertebrate hosts. Mature Sindbis virus particles consist of an inner capsid surrounded by a host-derived lipid bilayer, which in turn is surrounded by a protein shell consisting of the E1 and E2 glycoproteins. While a homolog of the E1 glycoprotein has been structurally characterized, the amount of structural data on the E2 glycoprotein is considerably less. In this study, the organization of the E2 glycoprotein was probed by surface biotinylation of intact virions. The virus remained fully infectious, demonstrating that the biotinylation did not alter the topology of the proteins involved in infection. Seven sites of modification were identified in the E2 glycoprotein (K70, K76, K97, K131, K149, K202, and K235), while one site of modification in the E1 glycoprotein (K16) was identified, confirming that the E1 protein is almost completely buried in the virus structure.

Hydroxyl radical surface mapping is a useful tool for investigating protein structure and folding. The rate of protein side-chain oxidation by the hydroxyl radical is known to be affected primarily by the chemical reactivity of the side chain and the accessibility of the reactive site to the radical. Efforts have been made to determine the inherent rate of stable product formation of each amino acid side chain, so that the rate of oxidation of an amino acid can be used to accurately estimate the average solvent accessibility of the amino acid side chain in the folded protein. However, the effects of nearby primary sequence on peptide oxidation have not been studied. Here, we examine the amounts of various oxidation products of a small peptide consisting of one leucine and one aspartic acid separated by zero to five glycine residues, as well as with modification of the N- and C-terminus. We find that the relative amounts of certain oxidation products can be heavily influenced by the primary structure of the surrounding peptide. The formation of many products, including hydroxylation, is inhibited by proximity to negative charges, while the formation of other products showed more complicated responses to changing primary sequence.

Derivatization of a variety of peptides by a method known to enhance anhydride formation is demonstrated by mass spectrometry to yield ions that have elemental composition and fragmentation properties identical to [b(n-1) + OH + H]+ ions formed by gas-phase rearrangement and fragmentation. The [b(n-1) + OH + H]+ ions formed by gas-phase rearrangement and fragmentation and the solution-phase [b(n-1) + OH + H]+ ion structural analogs formed by derivatization chemistry show two different forms of dissociation using multiple-collision CAD in a quadrupole ion trap and unimolecular decomposition in a TOF-TOF; one group yields identical product ions as a truncated form of the peptide with a free C-terminal carboxylic acid and fragments at the same activation energy; the other group fragments differently from the truncated peptide, being more resistant to fragmentation than the truncated peptide and yielding primarily the [b(n-2) + OH + H]+ product ion. Nonergodic electron capture dissociation MS/MS suggests that any structural differences between the specific-fragmenting [b(n-1) + OH + H]+ ions and the truncated peptide is at the C-terminus of the peptide. The specific-fragmentation can be readily observed by MS(n) experiments to occur in an iterative fashion, suggesting that the C-terminal structure of the original [b(n-1) + OH + H]+ ion is maintained after subsequent rearrangement and fragmentation events in peptides which fragment specifically. A mechanism for the formation of specific-fragmenting and nonspecific-fragmenting [b(n-1) + OH + H]+ ions is proposed.

Photochemically generated hydroxyl radicals were used to map solvent-exposed regions in the C14S mutant of the protein Sml1p, a regulator of the ribonuclease reductase enzyme Rnr1p in Saccharomyces cerevisiae. By using high-performance mass spectrometry to characterize the oxidized peptides created by the hydroxyl radical reactions, amino acid solvent-accessibility data for native and denatured C14S Sml1p that revealed a solvent-excluding tertiary structure in the native state were obtained. The data on solvent accessibilities of various amino acids within the protein were then utilized to evaluate the de novo computational models generated by the HMMSTR/Rosetta server. The top five models initially generated by the server all disagreed with both published nuclear magnetic resonance (NMR) data and the solvent-accessibility data obtained in this study. A structural model adjusted to fit the previously reported NMR data satisfied most of the solvent-accessibility constraints. Through minor adjustment of the rotamers of two amino acid side chains for this latter structure, a model that not only provided a lower energy conformation but also completely satisfied previously reported data from NMR and tryptophan fluorescence measurements, in addition to the solvent-accessibility data presented here, was generated.